Linking Your New Blu-ray Player to a vintage TV. Get the HDMI to Component Converter

Introduction: Connecting Your Brand-new Blu-ray Player to a vintage television

Would you like to watch Blu-rays in your TV that is old thatn't have HDMI input? Here are a few directions on the best way to accomplish that.

HDMI to component converter

A two method 3 RGA cable

A two means HDMI cable

Teacher Notes

Instructors! Did this instructable is used by you in your classroom? Put in a instructor Note to talk about the method that you included it into the course.

Step one: Get The Blu-ray Player.

simply take your new player that is blu-ray regarding the package.

Step two: Get The HDMI to Component Converter

You'll need this adapter to transform the output that is digital of Blu-ray player to an element input for the TV.

You can aquire these online or get one from your own nearest electronic devices shop.

Here is a web link to your one I think we'll purchase:

Step three: Plug in Your Bluray Player

Step four: Plug within the HDMI Cord

This would be attached to both your Blu-ray player as well as the HDMI to Component converter package . I do not have an image associated with converter box it yet because I haven't ordered.

Action 5: get the 3 VGA Input You desire to connect Your Blu-ray towards.

Most TVs have inputs into the straight straight back associated with the television, many has them regarding the front side. The television i am making use of has 3 inputs, two into the relative as well as one out of the leading.

Action 6: Plug in 3 RCA Cord

Match the colors of this RCA cable towards the colors that are corresponding your TV plus in the converter package. Listed here are images of me plugging them in to the front side additionally the relative straight straight back of my television. Into the final end i'll keep them attached to input 1 in the straight straight back of my television.

Action 7: switch on Your television and choose the right Input Channel.

Action 8: switch on the Blu-ray Player and luxuriate in viewing Your Favorite Movies!

1 Individual Made This Venture!

Did you create this task? Share it with us!

Suggestions

Arduino Contest 2020

Very First Time Author Contest

Area Challenge

17 Talks

the truth is. i cant figure out which one may be the input that is correct, YAY, yep, we'm that sluggish. Could I am helped by you away?

Reply 5 months ago

Do you get the problem determined

Answer three years ago

You are not sluggish. Someplace within the directions for your Blu-Ray player it's going to inform you which channel or networks are appropriate input stations, and exactly how to create the Blu-Ray player to a single channel or the other. Then set your tv to the channel that is same the Blu-Ray player also it should work fine.

Reply three years ago

Then cycle through the A/V channels until you see video if you have everything hooked up properly, just turn both your TV and player on.

Concern 5 months ago on Introduction

RGA cable is the fact that the blue, green, and red cable

I’m maybe maybe not a professional; but I’m pretty certain you recommend A hdmi/component converter; and after that you depict plugging in the Composite inputs regarding the television.

We bought the package shown and connected a sony trinitron TV up to a sony blu ray disc player that is new. I attempted all inputs but just obtain a fixed image and sound recording. In addition attempted another sony television with all the exact same result. We appreciate this post but have actually unsuccessful.

Answer two years ago

I did so the thing.mine that is same failed also.you are not by yourself.

i observed these guidelines to your tee.i have always been nevertheless getting signal that is unusable my television.what may I perhaps be doing wrong.

One note i would include for those who aren't electronically inclined who might see this: i will be pretty certain once you convert from HDMI to your other input, the standard will likely be during the input that is converted. It's not going to be HDMI quality.

The converter you're showing won't have the red yellowish white, but cable does. I am confused! My television just has the 3 way rca plugs.

Answer three years ago

It is either the incorrect converter or he's showing the incorrect region of the converter. Head to Amazon, look up "HDMI to Component Converter" and appearance during the reviews and responded concerns discover a tool which will do just what it is wanted by you to accomplish.

For individuals having problems understanding this. Component cables would be the 6 cable cord. 3 video clip cables in red, blue, and green and 2 sound cables in red and white.

Component cables are only a three cable strand. 2 sound ( white and red once again) and 1 video in yellow.

Which will make their focus on a television with composite inputs, an additional converter will be had a need to covert from composite (6 strand cable) to component (3 strand cable). Hope it will help individuals.